Showing 101–120 of 985 results
24V 20A Industrial SMPS Power Supply
Rated 0 out of 5
0 Reviews
24V 20A Industrial power supply with Aluminium casing, High quality. Best suitable for 3D Printer and CNC Machines.
24V 2A 48W Industrial SMPS Power Supply
Rated 0 out of 5
0 Reviews
A High quality 24V 2A Industrial SMPS power supply with Aluminium casing.
24V 3A 72W Industrial SMPS Power Supply
Rated 0 out of 5
0 Reviews
A High quality 24V 3A Industrial SMPS power supply with Aluminium casing.
24V 3A SMPS Adapter Power Supply Generic
Rated 0 out of 5
0 Reviews- Input - 100-240V AC 50/60Hz
- Category - Switch Mode Power Adaptor (SMPS)
- Output Type - DC
- Output - 24Volts 3Amp
24V 4010 Cooling Fan
Rated 0 out of 5
0 Reviews- Perfectly fit on the extruder
- Noiseless Performance
- Very low Current consumption
- Easy to install and connect.
24V 5A 120W Industrial SMPS Power Supply
Rated 0 out of 5
0 Reviews
24V 5A 120W Industrial SMPS Power Supply is single output enclosed type power supply with metallic mesh case. Adopting the input of 115VAC or 230VAC.
24V/12V To 5V 5A Power Module DC-DC XY-3606 Power Converter
Rated 0 out of 5
0 Reviews- Working voltage: DC 9V–36V
- Output voltage: 5.2V/5A/25W
- 9~24V input: Output 5.2V/6A/30W
- 24~32V input: output 5.2V/5A/25W
- 32~36V input: output 5.2V/3.5A/18W
25Kg High Torque Digital Metal Gear Servo
Rated 0 out of 5
0 Reviews- Voltage Range (VDC): 4V-8.4V
- Rated Torque: 25Kg.cm @ 7.4V
- Gears Type: Steel Metal
- Connector: JR
- Command Signal: PWM
- Size (L x W x H) mm: 55 x 20 x 43
2CH. PWM Duty Cycle Square Wave Rectangular Wave Signal Generator
Rated 0 out of 5
0 Reviews- Operating Voltage: 5-30V, support micro USB 5.0V power supply
- Frequency Range: 1Hz-150KHz@2%
- Signal Load Capacity: output current is within 8–30mA
- Output Range: default 5V V-pp (can be changed by external power)
2WD Smart Robot Car Chassis kit With Battery Box & Speed Encoder
Rated 0 out of 5
0 Reviews
With this car platform, add some micro-controller (such as Arduino) and sensor modules, and program it. Then you make your own robot car. Mechanical structure is simple, very easy to install.The car comes with tachometer encoder.
2xAA Battery Holder-5Pcs
Rated 0 out of 5
0 Reviews
The case box can keep your batteries organized and protected. The holder case is designed with leads for easy to solder and connect. This battery holder case is perfect for the devices need a 3V external battery.
3 in 1 Gold Heat Sink Aluminum For Raspberry Pi - 2Set
Rated 0 out of 5
0 Reviews- The heat sinks have short profiles that are enough to fit within standard Raspberry Pi cases.
- The aluminum heat sinks work well to dissipate excess heat.
- Easy to apply, come with self-adhesive.
- Includes one large and two small heat sinks.Easy to apply heat sinks for a Raspberry Pi board
3 x AA Battery Holder For 4.5V Output -3Pcs
Rated 0 out of 5
0 Reviews
This is a 3xAA Battery Clip Slot Holder Stack Box Case for 4.5V output.The case box can keep your batteries organized and protected. The holder case is designed with leads for easy to solder and connect. This battery holder case is perfect for the devices need a 4.5V external battery.
3.5" Touch LCD Shield For Arduino Uno-Mega
Rated 0 out of 5
0 Reviews- 3.5″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
- It can control the backlight to connect the transistor to a digital pin
- 480×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
- 4-wire resistive touchscreen
- 8-bit digital interface, plus 4 control lines