Showing 381–400 of 985 results
Digital Voltmeter & Ammeter DC 0-100V 10A Panel Mount
Rated 0 out of 5
0 Reviews- Operating Voltage: 4.5-30V
- Current Consumption: <60mA
- Testing Voltage: 0-100V
- Testing Current: 0A-10A
- Easy to read even in dim light
DIY Gripper With Servo 9G Motor
Rated 0 out of 5
0 Reviews
This is the small gripper. It is light and small, perfect for the small project such as robot arm. The gripper is controlled by Tower Pro Micro RC Servo Motor 9g SG90. The gripper will open when the servo motor move to 90 degree and it will be closed when the servo motor move to 180 degree. The gripper can be attached easily to other hardware by locking the predesign M3 screw hole.
DIY RC Quadcopter Drone Kit XYQ-2
Rated 0 out of 5
0 Reviews
Functions: Sideward flight, turn left/right, up/down, forward/backward, altitude hold, one key takeoff/landing, 3D flip, headless mode, one key return
DIY Smart Car Transparent Chassis 4WD / Racing Car / Robot Car
Rated 4.67 out of 5
(4.67)3 ReviewsThis DIY Smart Car Transparent Chassis 4WD / Racing Car / Robot Car / containing 4 BO motors, 4 Wheels, chassis etc parts for making robot.
4 Wheel Robot Smart Car Chassis Kits for Arduino, Raspberry and Robotics Projects
Doppler Radar Sensor With Digital Output-RCWL-0516
Rated 0 out of 5
0 Reviews
This mini Doppler Radar Sensor With Digital Output-RCWL-0516 is equipped with supporting DC 4-28V wide voltage It will automatically continuously output the high level TTL signal when there is motion. 360 degree no blind angle detection and maximum 7m sensing distance. It is perfect for DIY microwave motion sensor light switch, human sensor toys, smart security devices, etc.
Downloader Expansion Board For TTGO T-Internet- POE
Rated 0 out of 5
0 Reviews- Chipset: ESPRESSIF-ESP32-WROOM, LAN8720A Ethernet chip, SI3404 Power management chip
- FLASH:4MB
- SRAM:520kB SRAM
- It has a type-c USB.
- Support cloud server development /SDK for user firmware development.
DRV8833 2-Channel DC Motor Driver Module
Rated 0 out of 5
0 Reviews- Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor
- Operating voltage: 2.7 V to 10.8 V
- Output current: 1.2 A continuous (2 A peak) per motor
- Inputs are 3V- and 5V-compatible
Dual Micro USB 3.7V to 5V, 2A Power Bank DIY 18650 LiPo Charger
Rated 0 out of 5
0 Reviews- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- Built-in lithium battery protection IC, over-current, under voltage protection;
- Dual USB output ports.
- Input port: Micro USB
- Output port: USB
- Output parameters: 5V1A/5V2A
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
Dual Monster Moto Shield VNH2SP30 DC Motor Driver 2x14A (Peak 30A)
Rated 0 out of 5
0 Reviews
Voltage Max: 16V, Maximum current rating: 30 A, Practical Continuous Current: 14 A, Current sensing available to Arduino analog pin, MOSFET on-resistance: 19 mΩ (per leg),Maximum PWM frequency: 20 kHz, Thermal Shutdown, Under voltage and Over voltage shutdown.
Dual Shaft BO Motor And Wheel 2-Set
Rated 0 out of 5
0 Reviews
This is high quality Bo motor and wheel set for making robot or racing car.
Dual USB Output 5V 3A DC-DC Buck Power Supply Module
Rated 0 out of 5
0 Reviews- Input : 6V-40V
- Output : 5V / 3A (MAX)
- Efficiency : 92% (MAX)
- Switching frequency : 150KHZ
- High efficiency and low ripple.
- With USB power indicator light.
- Maximum output 3A (at the same time with two mobile phones).
Dust Smoke Particle Sensor-GP2Y1010AU0F
Rated 0 out of 5
0 Reviews- Power supply voltage: DC5 ± 2V
- Operating Current: 20mA (peak)
- Sensitivity: 0.5V / (0.1mg / m3)
- The minimum detection level of particles: 0.8 m
- Clean air voltage: 0.9V typ.
