Servo Motors Archives - Deltakit -Electronic Parts-Robotic Parts-Sensors-3D printer parts

Different types of Servo motors used for robotic applications like Robotic arm, pick & place robot.

Showing 1–20 of 24 results

20Kg High Torque Waterproof Digital Metal Gear Servo

Rated 0 out of 5

0 Reviews

₹1,652.00

Description : 20Kg waterproof servo for 1/10 RC car steering
Size : 55*20*43MM
Torque : 18Kg.cm ~ 20Kg.cm
Speed : 0.13sec ~ 0.11sec/60 degree
Voltage : 6.0Volts ~7.4Volts dc

25Kg High Torque Digital Metal Gear Servo

Rated 0 out of 5

0 Reviews

₹1,652.00

Voltage Range (VDC): 4V-8.4V
Rated Torque: 25Kg.cm @ 7.4V
Gears Type: Steel Metal
Connector: JR
Command Signal: PWM
Size (L x W x H) mm: 55 x 20 x 43

30KG Serial Bus Servo Waveshare

Rated 0 out of 5

0 Reviews

₹2,832.00

Model: ST3215 serial bus servo
Operating voltage: 6 – 12V
Mechanical limited angle: No Limit
POS sensor resolution: 180° / 1024
Idling speed: 0.18sec / 60°@4.8V 0.16sec / 60°@6V
Baud-rate: 38400bps – 1Mbps

Hot

35.5Kg High Torque Digital Metal Gear Servo

Rated 0 out of 5

0 Reviews

₹2,124.00

Voltage Range (VDC): 4V-7.4V
Rated Torque: 35Kg.cm @ 7.4V
Gears Type: Steel Metal
Connector: JR
Command Signal: PWM
Size (L x W x H) mm: 55 x 20 x 43

Aluminum Servo Arm Round Disk Type 25T -2 Pcs

Rated 0 out of 5

0 Reviews

₹118.00

Material: Aluminum
M3 Screws -4Pcs
Adjustable type servo arm
Mounting Hole Spacing: 14mm
Servo disc diameter: 20mm
25Tooth

Aluminum Steering Servo Horn Arm For Futaba Standard 25T

Rated 0 out of 5

0 Reviews

₹118.00

It is adjustable RC rocker for RC planes servo motors. Aluminum Hole centers at 20 and 24mm from the servo output 25T spine for RC Plane. It includes two steel bolt to secure the split clamp onto servo output.

Futaba S3003 Servo Motor-180 Degree

Rated 0 out of 5

0 Reviews

₹413.00

High Torque Servo CYS-S8218 Digital Metal Gear 40KG

High Torque Servo Digital Metal Gear 35.5KG

Rated 0 out of 5

0 Reviews

₹1,770.00

Long U Aluminium Servo Bracket Black

Rated 0 out of 5

0 Reviews

₹177.00

Metal Gear Servo Motor MG995-180º

Rated 0 out of 5

0 Reviews

₹354.00

MG996R Metal Gear Digital High Torque Servo

Rated 0 out of 5

0 Reviews

₹413.00

High value, general purpose, standard size servo with high torque. Easily used with the Arduino Servo library.

Multi-Function Servo Motor Bracket Steering Head For MG995 MG996R

Rated 0 out of 5

0 Reviews

₹295.00

Multipurpose Aluminium Standard Servo Bracket Black

Rated 0 out of 5

0 Reviews

₹177.00

Pan Tilt Camera Mount - 2 Axis With Servos 9G DIY

Rated 0 out of 5

0 Reviews

₹472.00

16-CH. 12-bit PWM/Servo Driver-I2C-PCA9685 for Arduino-Raspberry Pi

Servo Driver-I2C-PCA9685 for Arduino-Raspberry Pi-16CH.-12Bit

Rated 0 out of 5

0 Reviews

₹413.00

This 16-CH. 12-bit PWM/Servo Driver-I2C-PCA9685 for Arduino-Raspberry Pi uses I2C 7-bit address between 0x60-0x80, selectable with jumpers.Terminal block for power input (or you can use the 0.1" breakouts on the side).Reverse polarity protection on the terminal block input.3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1" so you can only stack 4 next to each other on 0.1" header

Servo Extension Cable-30cm - Male To Female - 3Pcs Pack

Rated 0 out of 5

0 Reviews

₹118.00

Servo Mount Holder Bracket For SG90/MG90 - 2Pcs

Rated 0 out of 5

0 Reviews

₹118.00

Servo Bracket holder for the SG90 Micro 9g Servo. It comes complete with the screws. Perfect fitting for Micro servo 9g/SG90.Acrylic 9G Servo Bracket.

Servo Tester / ESC Consistency Tester / PPM Generator

Rated 0 out of 5

0 Reviews

₹118.00

Tower Pro SG90 9g Servo Motor

Rated 0 out of 5

0 Reviews

₹177.00

Towerpro MG90S Mini Digital Servo 2.2kg / 0.08sec / 13g

Rated 0 out of 5

0 Reviews

₹295.00

The Micro Servo MG90S is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to another horizon of flight. The MG90S micro servo with accessories is perfect for R/C helicopter, plane, car, boat and truck use.

Model: MG90S
Weight: 13 gm
Operating voltage: 4.8V~ 6.6V
Servo Plug: JR
Stall torque @4.8V : 1.8kg-cm
Stall torque @6.6V : 2.2kg-cm

Menu